Garland CLEAN 104 E Manuel D'instructions page 21

Never use a damaged connection, which does
not comply with the rules or requirements for this
machine.
When using an extension cord be sure to have a
minimum cross section of 1.5 mm2, not more than
25 m, always fully unwound and that is suitable for
outdoor use. The use of an extension cord suitable for
outdoor use reduces the risk of electric shock.
Position the extension cord so that it does not
encounter obstacles and so it is not in the work area.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Always unplug the machine before performing any
work on the machine. Only handle this machine when
it is disconnected.
2.5. USE AND CARE OF THE MACHINE
Use this machine, accessories, tooling, etc. in
accordance with these instructions and as intended,
taking into account the working conditions and the
work to develop.
The use of this machine for other than the envisaged
applications may cause a dangerous situation.
Check that all the safety devices are installed and are
in good condition.
Remember that the machine operator is responsible
for the dangerous situations and accidents caused
to other people or things. The manufacturer shall not
be in any case responsible for damages caused by
improper or incorrect use of this machine.
Do not force this machine. Use this machine for the
correct application. Using the machine for the type of
work intended will allow you to work better and safer.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Maintain this machine. Check that the moving parts
are not misaligned or locked, that there are no
broken parts or other conditions which may affect the
operation of this machine. Whenever this machine is
damaged, repair it before use. Many accidents are
caused by poorly maintained machines.
Remove the plug from the power source before
making any adjustments, changing accessories, or
storing the machine. Such preventive safety measures
reduce the risk of accidentally starting this machine.
If the machine starts to vibrate in a strange way turn
it off and examine it to find the cause. If you cannot
find the reason, take your machine in for service. The
vibrations are always an indication of a problem in the
machine.
In case of prolonged stop, disconnect the machine
from the power supply.
2.6. SERVICE
Please periodically service your machine with
a qualified repair center using only identical
replacement parts. This will ensure that the safety of
this machine is maintained.
2.7. RESIDUAL RISK FACTORS
Even when using the tool in the prescribed manner it
is not possible to eliminate all residual risk factors.
21/104
English