Garland CLEAN 104 E Manuel D'instructions page 20

English
A moment of inattention while operating this machine
can cause serious personal harm.
Do not use this machine if any component is
damaged. Never use the machine with defective
guards, or without safety devices.
If you need to take out material that has entered in
the ducts of the machine switch off the engine before
performing this operation.
Be careful not to get your fingers or any other body
part inside or near the area of suction.
If the machine vibrates abnormally stop the engine,
inspect the machine looking for the possible cause
and repair. If you cannot find the reason take the
machine to a service technician.
Before leaving the machine unattended turn it off and
disconnect it from the power source.
Store idle tools out of the reach of children.
2.2.1. CLOTHING AND SAFTEY EQUIPMENT
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothing, jewelry or long hair can be
caught by moving parts.
The noise of the machine can damage hearing. Wear
auditory protection. If you work with this machine
often, regularly visit your doctor to check your hearing
capacity.
2.3. WORK AREA SAFTEY
Do not use the machine in explosive atmospheres, as
well as in the presence of flammable liquids and gases.
Electrical machines create sparks which may ignite
dust or fumes.
2.4. ELECTRICAL SAFTEY
Only connect this device to a power source of
230V/50Hz.
Do not expose this machine to rain or humid
conditions. If water enters the machine it will increase
the risk of electric shock.
Never cut the cable. There is a risk of electric shock
and damage to the machine.
The electrical plug of this machine must
match the base of the socket. Do not modify
the plug in any way. Non-modified matching
plugs will reduce the risk of electric shock.
Avoid touching elements connected to the ground such
as metal fences, pipes, etc. while using this machine.
Touching elements connected to the ground while using
this machine increases the risk of electric shock.
Do not touch the cords or plugs with wet hands.
Do not abuse the cord. Do not use the cable to carry,
lift, or unplug the machine. Keep the cable away from
heat, oil, sharp edges or parts in movement. Damaged
or entangled cords increase the risk of electric shock.
Never use the machine with a damaged cord or plug.
Before connecting the machine check the plug and
cable for damage. If you discover any damage, send
your machine to a Service Center for repair. If the cord
is damaged or broken, unplug immediately. Damaged
or entangled cords increase the risk of electric shock.
The replacement of the plug or the power cord should
always be done by the manufacturer or its technical
assistance service.
It is recommended to connect this machine to a
residual differential device whose current is less than
or equal to 30mA. You should check the operation of
the differential before using the machine.
20/104