Erreka NET Guide Rapide D'installation Et Programmation page 9

NET
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings
IMPORTANT and other explanations which must be taken into account. The installation manual can be downloaded by
NOTE going to the "Downloads" section at the Erreka website:
http://www.erreka-automation.com
Elements of the complete installation
Electrical cabling
A: Main power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Key switch

The barrier is supplied for assembly to the right. For
assembly to the left, carry out the "Changing side" (see
next page) before mounting the arm.
1 Lock the operator and mount the first section.
2 Unlock the operator and manually lower the arm.
3 Lock the operator and mount the second section.

Unlocking (manual operation):
turn the wing knob (P) clockwise until it
stops.
Lock (motorised operation):
turn the knob (P) anti-clockwise until it locks.
Arm assembly
Unlocking
Unlocking should be carried out with
caution. If the barrier is not balanced
or the arm is not mounted, the
internal spring may cause a violent
movement.
English
P
D136A
9