Axis M11 Serie Guide D'installation page 5

AXIS M11 Series
LED indicators
LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Install the hardware
Important!
AXIS M11 Series is designed for indoor and outdoor use. To use the
camera outdoors, install in an approved outdoor housing. Please see
www.axis.com for more information on outdoor housings.
1. Attach the stand to the camera by screwing it on. For wall
mounting, attach the stand to wall first, using 3 appropriate screws.
2. Attach the cable to the network connector (supports PoE class 1) in
the camera.
3. Check that the indicator LEDs indicate the correct conditions. See
table above.
Indication
Steady for connection to a 100 Mbit/s network. Flashes
for network activity.
Steady for connection to 10 Mbit/s network. Flashes for
network activity.
No network connection.
Steady green for normal operation.
Note: Configure the Status LED to be unlit during normal
operation, or to flash only when the camera is accessed
from Setup > System Options > LED. See the online help
files for more information.
Steady during startup, reset to factory default or when
restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Page 5