Télécharger Imprimer la page

Fellowes DS-700C Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

A.
B.
C.
D.
CAPABILITIES
Will shred: Paper, credit cards, staples and paper clips
Will not shred: Continuous forms, adhesive labels, transparencies, newspaper,
CD/DVDs, cardboard, laminates, file folders, X-rays or plastic other than noted above
Paper shred size:
Cross-Cut ..............................................................5/32 in. x 1-13/16 in. (4mm x 46mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keep away from children and pets. Keep hands away from paper
entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
15
Reverse (R) to back out object.
• Never use aerosol products, petroleum based lubricants or other flammable
15
products on or near shredder. Do not use canned air on shredder.
• Do not use if damaged or defective. Do not disassemble shredder. Do
not place near or over heat source or water.
15
2
E.
F.
G.
H.
KEY
A. Paper/Card entry
B. Safety lock
Maximum:
Sheets per pass ............................................................................................................. 7*
Cards per pass ............................................................................................................... 1*
Paper width ..........................................................................................8-6/7 in. (225mm)
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 2.5Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Recommended daily usage rates: 10-20
paper passes; 10 credit cards.
C. Window
D. Pull-out bin
E. Disconnect power switch
F. See safety instructions
G. Handle
7 sheets per pass.
• This shredder has a Disconnect Power Switch (E) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Do not put foreign objects in paper entry.
• The grounded socket-outlet shall be installed near the equipment and shall be
easily accessible.
ENGLISH
Model DS-700C
H. Control switch
R 1. Reverse
O 2. OFF
I 3. Auto-On

Publicité

loading