Télécharger Imprimer la page

Fellowes Powershred 12C Mode D'emploi page 3

Masquer les pouces Voir aussi pour Powershred 12C:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
BASIC SHREDDING OPERATION
Continuous operation:
NOTE: Shredder runs briefly after each
pass to clear entry. Continuous operation
beyond 20-minutes will trigger 30-minute
cool down period.
unlock, slide black button up. For greater safety, always unplug shredder after use.
PRODUCT MAINTENANCE
OILING SHREDDER
performance. If not oiled, a machine may
experience diminished sheet capacity, intrusive
noise when shredding and could ultimately
recommend you oil your shredder each time
you empty your waste bin.
TROUBLESHOOTING
PAPER JAM
1
2
Set to Reverse (
)
Alternate slowly back and forth
for 2-3 seconds
illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and
recovery time for this shredder.
Remove Paper: When illuminated, press reverse (
LIMITED PRODUCT WARRANTY
defects in material and workmanship and provides service and support for 2 years from the date of
purchase by the original consumer. Fellowes warrants the cutting blades of the machine to be free
from defects in material and workmanship for 5 years from the date of purchase by the original
consumer. If any part is found to be defective during the warranty period, your sole and exclusive
warranty does not apply in cases of abuse, mishandling, failure to comply with product usage
standards, shredder operation using an improper power supply (other than listed on the label), or
unauthorized repair. Fellowes reserves the right to charge the consumers for any additional costs
Australia Residents Only:
PAPER/CARD
1
2
Plug in and turn
Set to Auto-On (
( I )
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
Set to Off ( )
*Apply oil across entry
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
3
4
Set to Off ( )
and unplug
3
)
Feed paper/card
straight into paper
entry and release
) position, then slide black button down.
3
Set to Reverse (
)
for 2-3 seconds
5
6
Gently pull uncut
Set to Auto-On (
paper from paper
and resume shredding
entry. Plug in
incurred by Fellowes to provide parts or services outside of the country where the shredder is initially
service under this warranty, please contact us or your dealer.
4
When finished shredding,
set to Off ( )
)
3

Publicité

loading