Weber-Stephen Products Spirit E210 Mode D'emploi page 23

BURNER TUBE CLEANING
OR REPLACEMENT (continued)
Remove Burner Tubes
For Spirit grills with 2 burners (210 and 220 models):
®
A) Slide burner tube 1 out from under the guide screw
and washer. Move burner tube 1 slightly to the left to
detach it from Crossover ® tube (1).
B) Remove Crossover tube (2).
®
C) Lift burner tube 1 up and out of cookbox while guiding
the wires through the hole in the cookbox (3).
D) Slide burner tube 2 out from under the guide screw
and washer. Lift burner tube 2 up and out of the
cookbox (4).
For Spirit grills with 3 burners (310 and 320 models):
®
A) Slide burner tube 1 out from under the guide screw
and washer. Move burner tube 1 slightly to the left to
detach it from Crossover ® tube (1).
B) Lift burner tube 1 up and out of cookbox while guiding
the wires through the hole in the cookbox (2).
C) Slide burner tube 3 out from under the guide screw
and washer. Move burner tube 3 slightly to the right to
detach it from Crossover tube. Lift burner tube 3 up
®
and out of cookbox.
D) Slide burner tube 2 out from under the guide screw
and washer. Remove the Crossover
toward back of cookbox (3). Lift burner tube 2 up and
out of cookbox.
ANNUAL MAINTENANCE
1
2
tube by moving it
®
3
4
1
2
3
WWW.WEBER.COM
23
®