Grounding Instructions - Windsor Versamatic VS14 Mode D'emploi

Masquer les pouces Voir aussi pour Versamatic VS14:

Manuel d'utilisation (17 pages)

Mode d'emploi (62 pages)

Mode d'emploi (22 pages)

Table des Matières

Les langues disponibles

Safety

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least

resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having

an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet

that is properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified

electrician.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illus-

trated in sketch A. A temporary adaptor looks like adaptor illustrated in sketches B and C, may be used it

connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The

temporary adaptor should be used only until a properly grounded outlet (sketch A) can be installed by a qualified

electrician. The green colored rigid ear, lug or the like extending from the adaptor must be connected to a

permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held

in place by a metal screw.

Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.

GROUNDED

OUTLET

GROUNDING