Installation (continued)
3
Installing the escutcheon
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Before installation, remove the ange (F).
□
Ensure that the gasket (H) is pressed onto the
escutcheon (G) before the escutcheon (G) is
installed over the three holes in the sink.
□
From underneath sink, hand tighten the
mounting nuts (I). Do not overtighten.
NOTE: If the sink is uneven, use silicone under the
gasket (H).
I
4
G
F
H
5
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (G).
Please contact (800) 880-8164 for further assistance.
A
G
www.schonsimplymodern.com