Publicité
10
NuQ PRO Series
Amplifi er Considerations
The NuQ PRO series loudspeakers are optimized for use with the TURBOSOUND T series amplifi ers with
the LMS series controllers. A full range of DSP settings to suit any confi guration are provided for download
on the TURBOSOUND website. The use of third party amplifi cation and processing is only advised using
the matrix of manual settings as well as the limiter calculator provided on the TURBOSOUND website.
NuQ PRO series loudspeaker enclosures should be driven by high quality power amplifi ers designed for true
professional use. Power amplifi ers should be capable of delivering long term broadband power equal to half
the loudspeaker's peak power rating at its stated nominal impedance. The use of underpowered amplifi ers
must be avoided as heavily clipped signals can cause permanent loudspeaker damage. Limiters, crossovers
and equalisation points must be set in accordance with the settings provided on the TURBOSOUND website.
This will ensure the optimum sound quality and long-term reliability as well as protection from damage.
Neutrik speakON* NL4 locking input connector(s) are provided, allowing options for input and link, passive,
and bi-amp operation.
Model
NuQ62
Mode
Passive
Passive
Impedance
16 Ω
8 Ω
Continuous
Minimum
150 W
250 W
RMS
Amplifi er
Power
Peak
600 W
1000 W
Model
NuQ112
Mode
Passive
Bi-amp LF
Impedance
8 Ω
8 Ω
Continuous
Minimum
400 W
400 W
RMS
Amplifi er
Power
Peak
1600 W
1600 W
NuQ82
NuQ102
Bi-amp LF
Bi-amp HF
Passive
Bi-amp LF
Bi-amp HF
8 Ω
6 Ω
8 Ω
8 Ω
6 Ω
250 W
30 W
300 W
300 W
30 W
1000 W
300 W
1200 W
1200 W
300 W
NuQ152
NuQ115B
Bi-amp HF
Passive
Bi-amp LF
Bi-amp HF
Passive
6 Ω
8 Ω
8 Ω
6 Ω
8 Ω
40 W
500 W
500 W
40 W
500 W
400 W
2000 W
2000 W
400 W
2000 W
Connections
Model: NuQ62
Mode
Back Panel
Passive
Only
Models: NuQ82, NuQ102, NuQ122, NuQ152
Mode
Back Panel
Passive
NuQ118B
Passive
8 Ω
600 W
2400 W
Bi-Amp
Connector
Internal Schematic
speakON NL4
PASSIVE, Input Full Range +
>
1+
NL4
1 -
>
Input/
1-
1+
2+
>
PASSIVE, Input Full Range -
Link
2 -
>
2-
2+
>
1+
NL4
>
1 -
Input/
>
2+
Link
2 -
>
Connector
Internal Schematic
speakON NL4
PASSIVE, Input Full Range +
>
1+
NL4
1 -
>
Input/
1-
1+
2+
>
PASSIVE, Input Full Range -
Link
2 -
>
2-
2+
>
1+
NL4
>
1 -
Input/
>
2+
Link
2 -
>
speakON NL4
BI-AMP, Input Low +
>
1+
Amplifier Channel 1
NL4
1 -
>
Input/
1-
1+
BI-AMP, Input Low -
>
2+
Link
BI-AMP, Input High +
2-
2 -
>
2+
Amplifier Channel 2
BI-AMP, Input High -
>
1+
NL4
>
1 -
Input/
>
2+
Link
>
2 -
Quick Start Guide
11
HPF
HF
LPF
LF
HPF
HF
LPF
LF
HF
LF
Publicité
