nedis KADF600FSR Guide De Démarrage Rapide page 10

Before first use
1. Remove all packaging material, protective stickers and covers from the
product.
2. Clean the frying basket A
rinse it with warm water and wipe it dry.
Placing the handle (image B)
Make sure that the basket handle A
-
1. Fit the ends of A
8
2. Move A downwards and press it until it locks into A
Installing the product (image C)
Follow the instructions (image C).
Using the product (image D)
-
Do not touch any hot surfaces.
-
Make sure that all parts are dry before you fill the fryer with oil or fat.
-
This product is only suitable for use with oil or liquid fat, not for solid fat.
q
1. Fill A with oil between the Min – Max indicators A
-
Only use oil that is suitable for frying.
-
Never use the product without oil or fat, this will damage the product.
-
Only use the product for frying food.
-
Place the product on a stable, flat and heat resistant surface.
-
Ensure a minimum of 10 cm free space around the product to provide
enough ventilation during frying.
2. Place the lid A
3. Plug the power connector A
4. Plug the power cable A
The power indicator LED A
5. Check the food packaging for the required frying temperature and duration
to get the best results.
6. Set the control dial A
The heat indicator LED A
-
Do not place food in the product before it has reached the set temperature.
2
A
switches off when the oil has reached the set temperature.
6
7. Remove A
7
8. Lift A and hang it on the edge of A
7
and the inner pan A
8
into the eyes of the frying basket A
6 q
on A
.
i
u
into the power outlet.
1
lights up.
4
to the correct temperature.
2
lights up.
q
from A
.
q
8
is placed correctly.
into the power input A
q
.
10
in warm soapy water,
7
.
7
.
w
.
r
(image E).