Brandson Equipment 303985 Mode D'emploi page 28

1
No.
1
2
5. Installation
Take the appliance out of the package and remove all the packaging material. Then
check the product for any damage. Place the heater on a flat surface. The heater
has to be placed at least 1 m away from other objects and should not be kept
directly under a socket.
Caution! Make sure that the appliance is not placed near flammable materials or
any liquids. The air outlet should also not point in this direction.
Note: To ensure that the heater works and heats properly, the desired temperature
must be set on the heater so that it is a couple of degrees higher than the room
temperature. If the heater does not start heating, increase the desired temperature
to activate the heating elements.
28
Discription
Maximum temperature setting
Minimum temperature setting
2
English