MS TOKYO Manuel D'instructions page 29

17. Turn off the automatic driving safety system - (turn to mechanical mode)
Method 1: press the driving induction
button for 3 seconds, and step on the
brake pedal by using your right foot at
the same time.Then unzip the battery
box and switch it to off. Then loosen
the brake pedal. If the stroller moving
freely, it is in the mechanical mode.If
this can't work, you can use method 2.
Method2: step on brake pedal, unzip
the battery box and switch the power
to off and then to on for 3 seconds and
then to off. Loosen the pedal and the
stroller.
Method 3: When the power is low or
has other special situations, please fo-
llow the arrows in Picture 16a to switch
the manual brake lever to the end of
the L-shape guide slot at the left and
right sides of the bottom of the rear
wheel and manually forced to lift the
automatic driving safety system. If you
need to re-use the automatic driving
safety system, you can turn the both
sides of the manual brake lever back to
the home position.
Unzip the carrying basket battery box
and insert one side of the stroller spe-
cialized charge cable into the charging
interface and another side into adapter
charger interface to connect the home
power supply. When the stroller bat-
tery is charging, the charging indicator
light is red and when the power is full,
the charging indicator light is green.
17
Manual release
automatic driving
safety system
Home position
18. Charge the battery box
18
Charge
cable
OFF
Charging indicator light
Charger
connector
Manual brake lever
Stroller power
charging con-
nector
29 29 29 29