MS TOKYO Manuel D'instructions page 24

4. Installation and disassembly of armrest components:
Make the armrest components
against the armrest socket
and insert them one by one.
The armrest components can
be pulled out and inserted on
one side. You should press the
armrest removed button and
pull up the armrest if you need
remove the armrest.
5. Install the canopy:
a.Before you install the canopy
bracket base, you should distin-
guish the outside and the inside
of the base. Then insert the base
into its place on the seat.
b. Penetrate the canopy bracket
twig in the canopy cover. Then
put the twig aim at the canopy
bracket base and insert it in the
base.
c. At last, hang the lock hole at
the bottom of canopy on han-
ging column.
6. Use the canopy:
Use you hands to push the front
of the canopy can open the ca-
nopy.On the contrary, can close
the canopy.
24
4
5
6
outside inside