Ingersoll Rand ARO RS2 B Serie Mode D'emploi page 3

WARNING
Always wear eye protection
when operating or
performing maintenance
on this tool.
Lubrication
Where Used ARO Part #
"O" Rings & Lip Seals 36460
Gears and Bearings 33153
Always use an air line lubricator with these tools.
We recommend the following Filter- - Regulator- - Lubricator
(FRL) Unit:
ARO Model P29231- - 110 plus 100067 Gauge
Do not mark any nonmetallic surface on this tool with customer identification codes. Such actions could affect
tool performance.
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
WARNING SYMBOL IDENTIFICATION
Read this manual before
operating tool.
SERVICING THE TOOL
Description
4 oz. Stringy
Lubricant
5 lb. "EP" - - NLGI
#1 Grease
CAUTION
CAUTION
NOTICE
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
WARNING
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
L
Emergency
Shut--Off
Valve
Lubricator Regulator
FRL
Drain Regularly
3
WARNING
Always wear hearing
protection when operating
this tool.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
Compressor
(Dwg. TPD905- -2)