Télécharger Imprimer la page

Power Dynamics PDM660 Manuel D'instructions page 2

Publicité

Les langues disponibles

Les langues disponibles

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
The PDM660 is an very versatile condenser microphone with built-in pop filter. Delivered includes a microphone holder, adapter
screw, 5 meter microphone cable and ABS-case.
WARNING:
-
Read the manual prior to using the unit.
-
Keep the manual for further reference.
-
Keep the original packaging to ensure safe transport of the unit.
-
For indoor use only.
-
Set the volume of the microphone to a level that doesn't cause feedback in order to prevent damages to the audio
equipment.
-
Keep away from high temperatures, humidity and strong vibrations.
-
Also read the manual of the unit to which the microphone will be connected prior to operating it.
CONNECTION OF THE MICROPHONE:
-
Plug the XLR-connector into the microphone until it clicks into position. (Make sure that
the microphone is switched OFF when you plug or unplug the lead).
-
Push the small switch on the XLR-connector to unplug it from the microphone.
-
The microphone is fitted with a 5/8" internal thread which fits on every standard
microphone stand.
OPERATION:
-
The microphone is switched ON and OFF via the switch.
-
Set the microphone to the OFF position prior to connecting or disconnecting it from a
mixer or any other audio equipment.
-
Connect the microphone with the supplied microphone cable 3-pin XLR plugs to the
XLR microphone input equipped with +48V phantom power of your audio unit (e.g.
mixing console).
-
Speak into the microphone at a distance of 2 to 5cm. Reduce or increase this distance
accordingly in order to get a regular, natural sound
-
Place the microphone in a way that it doesn't cause feedback. It is recommended to
position the microphone at the same level or behind the speakers.
-
Do not drop the microphone.
-
Keep the microphone dry. Avoid extreme temperatures and humidity.
CARE:
Clean the case of the microphone with a dry cloth. Do not use cleaners or solvents.
WARNING!! WATER WILL DAMAGE THE MICROPHONE ELEMENT. THEREFORE THE GRILLE AND THE CAP
MUST BE COMPLETELY DRY BEFORE YOU PUT THEM BACK IN PLACE.
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
ENGLISH
2

Publicité

loading

Ce manuel est également adapté pour:

173.425