Hoover WH20400 Serie Guide D'utilisation page 14

4
To produce steam,
squeeze the trigger.
To prevent over-wetting
floors, avoid holding the
trigger continuously.
11
5
Move the steam mop slowly
back and forth across
the floor paying particular
attention to high traffic
areas. Squeeze/release
trigger as required.
6
To engage SteamStream™ from the front
nozzle, press the SteamStream™ button to
activate and squeeze the trigger to release
steam. Press the SteamStream™ button to
turn OFF (0=OFF).
TO SANITIZE
HARD
SURFACES
Select the
"STEAM ONLY"
setting.
Connect the
microfiber pad and
run a minimum
of 6 strokes at
a medium pace
(5-7 seconds per
32" stroke) across
same area. Allow
to dry.