Ingo Maurer Birdie's Busch Instructions page 5

English
remove the silver wire.
Ensure that the light bulbs do not touch the
Important:
wings.
Plug the lamp into the power supply. The on/off switch is
on the power cord.
Changing the bulbs
Unplug the lamp and allow the bulbs to cool
Caution:
down completely.
Remove the connecting wire (3) from the contact
sleeve (4) on the spent bulb, unscrew the bulb from the
holder ring (2) and insert the replacement as described
under "Inserting the light bulbs" above. 1
One spare bulb is supplied with the lamp. Further repla-
cements must be ordered from our dealers.
Cleaning
The goose-feather wings can be cleaned carefully with a
soft paintbrush.
Fingermarks on the nickel-plated lamp base can easily be
removed with an oil-based stainless steel cleaning spray.
Technical specification
230 V~50 Hz; 125 V~60 Hz. The correct voltage and fre-
quency for your lamp are indicated on the type label.
Secondary 24 V, halogen 7 x 10 W, E27 sockets.
Integrated 75 W electronic transformer.
A new light bulb must be fitted if the glass en-
closure is broken.
English
Any repairs that may become necessary must be carried
out by a professional electrician. In the event of damage
to the external power cord, replacements may only be fit-
ted by Ingo Maurer GmbH.
8 9