Télécharger Imprimer la page

ClearSounds CS-A300 DECT 6.0 Mode D'emploi page 20

Publicité

Les langues disponibles

Les langues disponibles

D E F d e f 3
G H I g h I 4
J K L j k l 5
M N o m n o 6
p Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
Adding names to the phone book
press the SoFT KEY under MENU while in standby mode.
press the DoWN KEY to scroll through the menu and select
pHoNEBooK then press the SoFT KEY to make your selection
press the DoWN KEY to scroll to NEW then press the SoFT KEY to
confirm.
The display will show NAME? Enter the name you want to use, then
press the Soft Key to select NEXT. The display will show NUMBER?
Enter the phone number (up to 20 digits) then using the Soft Key
select NEXT.
Use the DoWN KEY to select the Melody you would like to associate
with the number, using the Soft Key select SAVE to confirm.
Repeat as necessary
NOTE: If you make a mistake while entering a number, use the Soft
Key to select Erase to correct the mistake. To clear all the numbers
or characters, press and hold Erase.
Inserting A Pause
A pause is useful when you a programming a calling card number,
or you need extra time when accessing a interactive voice response
system i.e. banking by phone. A pause provides a delay of 3 seconds,
if you want to insert a pause when you are dialing a number in
standby mode or store a number in memory press the RIGHT KEY
then the letter p will appear.
Viewing Phone Book Entries
In standby mode press the DoWN KEY
press the UP or DOWN key repeatedly until the desired number is
displayed.
If you want to dial the selected number, simply press the DIAL KEY.
20 – ENGLISH

Publicité

loading

Ce manuel est également adapté pour:

V508