ClearSounds CS-A300 DECT 6.0 Mode D'emploi page 19

Press the DOWN KEY to scroll to REMOTE CODE then press the
SOFT KEY to confirm.
The LCD will show the current code, enter the new code you want to set
then press the Soft Key to Select OK.
This feature allows you to access your answering machine remotely.
Simply dial your phone number from any touch tone phone, then
enter your 4 digit security code (factory default is 0000).
Dial your phone using any touch tone telephone
When your greeting (or default greeting) begins to play, you can
enter your security code.
After entering the security code, the system will play the menu of
commands. You can then follow the commands to retrieve messages, etc.
1 Play main menu
2 Play new messages
3 Play saved messages
0 Delete all messages
5 Switch the answering machine on/off
6 Record Announce 1 of 2
(this depends on your announce setting)
Press the # to finish recording
NOTE: If you enter the wrong security code the A300 will announce
you need to enter the code again. You will have a total of 3 tries to
enter the correct security code before the line is disconnected
You should also stop playing messages before ending the call.
The phonebook in your A300 allows you to store frequently called numbers.
To enter a specific alphanumeric character, press one or more times the key
for the required character according to the following table: once for the first
character, twice for the second and so on.
Key Character
(spc) 0 ? & / . , !
1 @ _ + - " ( ) %
A B C a b c 2
Using the Remote Function
Remote Access Commands
PHONE BOOK
Character Map
19 – ENGLISH