NOTE: If you select Toll Saver, when there are new messages waiting
to be played back, the answering machine will respond after 3 rings,
if you have no new messages to be reviewed it will answer after 6
rings.
Setting the Language
You can select language for your default Announce 1 or Announce 2.
press the SoFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll to TAM Language then press the
SOFT KEY to confirm.
Press the DOWN KEY to scroll through the menu and select the
language (English is default) then press the SOFT KEY to make your
selection
Re-setting your Answering Machine
This function allows you to reset your Answering Machine to the
factory default settings.
Press the SOFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll to TAM Default Select then press the
SOFT KEY to confirm.
You will prompted to enter a PIN Code (default is 0000), then press
the SOFT KEY ICON to select RESET. If the PIN Code is validated all
answering machine settings will return to the factory default, otherwise
a warning tone will be heard and the settings will remain as you have
programmed them.
Note: After resetting, the Answering machine will reset and return
to standby mode.
Setting up a Remote Code
This function allows you to operate you answering machine remotely
from another location. For security purposes we recommend that
you change the code (the default is 0000).
Press the SOFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
18 – ENGLISH