CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power OFF and unplug the power adapter from the wall and the unit.
TO CLEAN THE TANK AND RESERVOIR
Remove the water tank from the Personal Space Cooler by lifting it
from the main unit. Unscrew the tank cap. Rinse the tank cap and
inside the tank with clean water and dry.
Remove the top cover from the water reservoir by pressing the release
buttons and slowly lifting the top cover from the reservoir.
To remove any scale or buildup, use a 50/50 mixture of white vinegar
and lukewarm water to clean the water reservoir and tank as needed.
TO CLEAN THE COOLING CARTRIDGE
Remove the cooling cartridge and rinse with clean water.
TO CLEAN THE PUMP FILTER
Check and clean both sides of the pump filter as needed. The pump
filter is held in place by friction. Pull out the pump filter, brush clean
with a soft-bristle brush (not included), and rinse clean. To reinstall,
firmly press the pump filter into place.
NOTE: Never run water over the pump filter while it is installed.
TO CLEAN THE SURFACE
Clean the surface of the unit with a clean, damp soft cloth as often as
needed. Never use detergents, excess water, treated cloths, harsh
cleaning agents, or sprays.
Storing your Personal Space Cooler: Clean the tank and water
reservoir with a 50/50 mixture of white vinegar and water. Wipe the
underside of the top cover with a soft, damp cloth. Rinse the cooling
cartridge with water and allow to air dry. Be sure to rinse thoroughly
and let all parts dry completely before packing in the original carton
and store in a cool, dry location.
9