TP-Link TL-WR841N Guide D'installation Rapide page 15

Version 4 (TCP/IPv4). Select Obtain an IP address automatically,
choose Obtain DNS server address automatically and click OK.
2) For Windows XP/2000
Go to Start > Control Panel. Click Network and Internet Connections >
Network Connections. Right-click Local Area Connection, select
Properties and then double-click Internet Protocol (TCP/IP). Select
Obtain an IP address automatically, choose Obtain DNS server
address automatically and click OK.
3. What can I do if I forget my password?
1) For default wireless password:
Please refer to the "Wireless Password/PIN" labeled on the bottom of the
router.
2) For the web management page password:
Reset the router first and then use the default user name and password:
admin, admin.
4. How do I restore my router's configuration to its factory default
settings?
If your router does not work properly, you can reset it and then configure it
again. With the router powered on, press and hold the WPS/RESET button
on the rear panel for approximately 8 seconds before releasing it.
13