TP-Link TL-WR841N Guide D'installation Rapide page 12

3. Click Quick Setup in the main menu and click Next.
4. Select the WAN connection type provided by your ISP. Or you can select
Auto-Detect and click Next to continue.
5. The Dynamic IP is the suitable connection type for most cases. Here we take it
as an example. In most cases, you don't need to clone the MAC address if you
have already rebooted the modem with the new router. But if you can't get
connection to the Internet after Quick Setup, please run it again and clone the
MAC address for a try. Then click Next.
10