Normal Occurences; Food Storage; Technical Data - Maxx Cold X Serie Guide D'installation, D'entretien Et D'utilisation

Congélateurs coffres marchandeurs mobiles
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DEFROST / IF ICE BUILDS UP ON INTERIOR WALLS:
1. Defrost the unit when the frost thickness on the wall of the cabinet reaches 1/4" (6mm) to optimize the freezing
capacity.
2. Turn the temperature control to the lowest point for 5-6 hours before defrosting.
3. Cut off the power and take out the food.
4. Use of warm water or a plastic scraper may accelerate the defrosting time of the cabinet wall.
5. After defrosting, clean the wall with dry cloth. Turn the power on. Allow time for the cabinet to reach its set-point
temperature. And then load the cabinet with food.

NORMAL OCCURENCES:

1. There may be a sound of flowing water when the refrigerant is running.
2. When the ambient humidity is too high, there will be condensation on the surface of the freezer and the lid.
3. When the machine is running, the condenser and compressor will be hot.
NOTE: Do not expect optimal performance if the ambient temperature exceeds 84°F (29°C) or the local
environment exceeds 60% relative humidity.

FOOD STORAGE:

The appliance is suitable for storing ice cream and similar ready-frozen foods.
Product must not be filled higher than the stacking mark on the inside of the freezer. (4" from the sliding lid)

TECHNICAL DATA:

ELECTRICAL
MODEL
POWER
MXF25CHC-2
115V/60Hz
MXF32CHC-3
115V/60Hz
MXF40CHC-4
115V/60Hz
MXF48CHC-5
115V/60Hz
MXF54CHC-6
115V/60Hz
MXF64CHC-7
115V/60Hz
MXF72CHC-8
115V/60Hz
NET
VOLUME
REFRIGERANT
CuFt (L)
3.81 (108)
R600a
4.87 (138)
R290a
6.71 (190)
R290a
8.62 (244)
R290a
9.96 (282)
R290a
12.36 (350)
R290a
14.30 (405)
R290a
5
NET WEIGHT
HORSEPOWER
Lbs (kg)
HP (W)
103.6 (47)
1/9 (89)
114.6 (52)
1/7 (118)
130.1 (59)
1/5 (150)
152.1 (69)
1/4 (186)
165.4 (75)
1/4 (186)
187.4 (85)
1/4+ (232)
231.5 (105)
1/2 (340)
NEMA PLUG
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P
5-15P

Publicité

Table des Matières
loading

Table des Matières