Ketra G21210BTGR33AWH/BK Manuel D'installation page 9

P R E - I N S TA L L AT I O N
Record location and serial number of each N3 Satellite:
• The serial number is helpful when configuring the products after installation.
• We recommend noting the serial number, location, and fixtures connected on installation drawings.
This can help with future programming and configuration. (The serial number can be found on the top
of the control board cover - see fig. 5).
SN: KD00000016
DC: K3914
OC: N3INDREC1BK
B
fig. 5
• The product can be rotated 180 degrees to enable aiming the beam. Note that when rotated, the
overall height and width of the space required for installation may change (see fig. 6).
fig. 6
P/N 3662343 Rev B
© 2019 Ketra, Inc. All rights reserved.
Status Monitor
Activity B A DMX DALIT RIAC Power
DC Out Analog I/O DMX Out DMX In DALI
A
9 | G2 INSTALLATION GUIDE