Publicité
Les langues disponibles
Les langues disponibles
7.
Cleaning after every operation
Motor version with an external start/stop
Clean the pump by flushing an appropriate cleaning agent.
> Do not use flammable liquids to clean the pump.
> The pump and flexible hose must be compatible with the cleaning agent.
> The pump should not be immersed deeper into the cleaning agent than the
outlet connection.
8.
Testing / Repair
8.1
Change of protection cover
The cover adheres strongly to the
the contact surfaces should be wetted with a few drops of detergent.
18 / 32
Original operating instructions battery motor type FBM-B 3100
Clean control cable only with a weak soap solution.
Regularly check the pump according to the relevant national
safety regulations and/or rules for prevention of accidents (in the
Federal Republic of Germany these are e.g. DGUV V3).
Only the manufacturer or an authorized repair shop should carry
out repairs.
Before removing the motor empty pump, hose and valves.
handle.
To facilitate the assembly / disassembly,
Publicité
