Kenmore 110.65212610 Guide D'utilisation Et D'entretien page 8

3.
elect t e desired cycle
Select the desired cycle for your load. See the Cycle uide
for more information about each cycle.
A to ry cycles
ou can select a diff erent dry level, depending on your load,
by turning the knob to ore, Normal, or ess.
Selecting ore, Normal, or ess automatically ad usts the
dryness level at which the dryer will shut off . nce a dry level
is set, it cannot be changed without stopping the cycle.
Auto Dry cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load si e, and dryness setting.
T : ore ry removes more load moisture. Normal ry is
used for a starting point for Auto ry cycles. Choose Normal
to save energy. ess ry removes less moisture and is used for
loads you may want to put on a hanger to complete drying.
4.
et cycle o tions
Select the cycle options by turning the knob to the desired
position.
T : Not all options and settings are available with all cycles.
rin le G ard o tion
et up to 40 minutes of heat free, periodic tumbling at the end
of a cycle. Turn the WRIN
at any time before the cycle has ended.
ry Tem
Turn the R T P knob to change the drying temperature
setting. See Setting the rying Temperature.
8
UAR knob to select N or
5.
elect C C G A if desired
Turn the C C SI NA knob to select the desired setting ( N
or ). The Cycle Signal produces an audible sound when the
drying cycle is fi nished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
T : When the Wrinkle Guard™ option is selected and the
Cycle Signal is on, the tone will sound every minutes until the
clothes are removed, or the Wrinkle Guard™ option ends.
6.
ress and old
to begin cycle
Press and hold the PUSH TO START button to begin the cycle.
Promptly remove items after cycle has completed to
reduce wrinkling. Use the Wrinkle uard
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
T TA T
option to avoid