Publicité
Les langues disponibles
Les langues disponibles
V1.0
1.
Connect roof (#16) with front plate (#17) and rear plate (#19) using
M5x12 screws with flange (#47), M5 hex nuts with flange (#53) and Ø5
flat washers (#45).
2.
Connect the left plate (#18) and the right plate (#15) to the roof
assembly using M5x12 screws with flange (#47), M5 hex nuts with
flange (#53) and Ø5 flat washers (#45). Tighten all screws and nuts.
Place the cabinet on a table or bench.
FUNNEL INSTALLATION
Connect the funnel's four sides (#6, #7) using M5x12 screws with
flange (#47), M5 hex nuts with flange (#53) and Ø5 flat washers (#45).
INSTALLATION
1.
Place the cabinet on its back on a table or bench. Connect the funnel
bottom plate (#9), screen frame (#10) to the cabinet using M6x25
screws (#44), M6 hex nuts with flange (#52) and Ø6 flat washers (#57).
Tighten all screws and nuts.
Visit www.princessauto.com for more information
Floor-Model Abrasive Blasting Cabinet
8046492
9
Publicité
