Publicité
Les langues disponibles
Les langues disponibles
8046492
4.
Wear protective clothing designed for the work environment and tool.
a.
When using the tool, wear clothing that is washable to remove
the fine dust created during the blasting process. Disposable
protective clothing is also recommended.
5.
Non-skid footwear is recommended to maintain footing and balance in
the work environment.
6.
Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
a.
Wear a NIOSH-approved respirator that protects both the lower
face and eyes during abrasive blasting operations.
7.
The air source used with this tool may cause hearing damage. Wear
hearing protection gear with an appropriate Noise Reduction Rating to
withstand the decibel levels.
8.
The tool may contain high pressure. Use safety glasses and gloves for
protection during operation. Keep hands clear of the exposed rubber
portions of the hose.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Keep your fingers away from the trigger/switch while carrying the tool,
attaching an air hose or an accessory. Lock the trigger/switch safety
if available.
5.
Avoid unintentional starts. Be sure that the regulator/throttle switch is
in the neutral or OFF position when not in use and before connecting it
to any air source.
6.
Never point the air stream or tool at any point of your body, other people
or animals. Debris and dust ejected at high speed can cause an injury.
7.
Serious injury or death may occur from inhaling compressed air. The air
stream may contain carbon monoxide, toxic vapors or solid particles.
Never inhale compressed air directly from the pump or air tool.
4
Floor-Model Abrasive Blasting Cabinet
For technical questions call 1-800-665-8685
V1.0
Publicité
