Publicité
DESCRIPTION
The DVA M2P is a passive louspeaker and it is part of the modular system called DVA MINI.
The DVA M2P can be used in ground stack configuration or suspended in line-array configuration.
The modules use a fast, innovative mechanical fastening method.
This series is ideal for installations in theatres, places of worship, convention centers, concerts and
live music performances which require medium-high sound pressures and limited weight and
footprint.
It is equipped with an internal passive filter to allow separate management of acoustic components,
by split the audio signal input into two signals: one for low frequencies and one for high
frequencies.
The passive crossover filter is designed with 12dB/oct slope for the low-pass part, 24dB/oct slope
for the high-pass and a self-resetting thermal protection circuit (PTC) on the driver to prevent
protracted overloading.
The bass section is composed of two 6.5" neodymium woofers
(voice coil 1.5"). The double phase plug in front of each individual
cone avoids horizontal phase overlapping increasing efficiency and
directivity. The double phase plug present in front of each individual
cone brings nearer the point of release of the woofer acoustic
avoiding the overlap of the horizontal phase.
DVA M2P is made of polypropylene with two rear side handles to facilitate transport and
installation. The speakers are equipped with steel brackets and an easy, simple locking system.
The rear bracket is graduated (0°-1.5°-3°-4.5°-6°-8°-10°-12.5°-15°) to allow fastening various
speakers with the desired angle.
The accurate design enables to achieve a constant and precise
coverage of 90° horizontally and 15° in the vertical direction for
each speaker.
The treble section consists of two 1" neodymium compression
drivers (voice coil 1") mounted vertically and spaced to optimize
vertical coverage.
The horn has been specially designed for the proper matching of the
speakers of the series DVA MINI.
ENGLISH
4
Publicité
