PNI IP390T Manuel De L'utilisateur page 4

EN
4. ADD DEVICE
4.1 QR code net-pairing (Recommended)
The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before
configuring Wi-Fi, please set the router parameters. The Wi-Fi password should not contain special
characters of ~!@#$%^&*(). When configuring Wi-Fi, make sure your router, mobile and device are as close
as possible for a quick configuration of the device.
Connect smartphone to this Wi-Fi 2.4 Ghz router with internet access. Activate GPS location from phone.
● App supports QR code net-pairing and Wi-Fi connection. You can choose to add device by other options.
● Power On the camera, and you can hear the broadcast "Wait for WiFi config", (if you heard nothing at all,
please click and hold "reset" button for 20 seconds to restore factory settings).
● When the mobile phone connecting to Wi-Fi, click "Add Device" or "+" icon (figure 1) on the Home screen
of the App, select "Security & Sensor"(figure 2)→ "Smart Camera", click "next step" (figure 3).
Enter Wi-Fi account and password, click "Confirm" (figure 4).
Figure 1
Figure 3
Figure 2
Figure 4
4