Connecting to an amplifier equipped with a Dolby Pro Logic Surround
Rechargeable Battery Pack
•
For new or exhausted rechargeable battery pack, we recommend it be recharged for 4 hours.
•
To charge the battery, just connect the AC adaptor.
•
If the battery does not work to your expectation, please consult the MPMAN service center.Do not attempt to
replace or repair the battery by yourself unless you are a qualified service personnel.
(2000mAh.7.4V Liion Rechargeable Battery Pack)
•
The battery can be recharged about 300 times without obvious performance drop.
Note:
•
Use the special charger.
•
Never dispose of in fire or heat up.
•
Do not use in high temperature or near heat sources.
•
Do not open the cover. Refer servicing only to qualified service personnel.
•
Do not charge up the battery pack while the DVD player is working with the battery pack.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
Low Battery Detection
•
The unit will access to STANDBY mode automatically when the battery is low.
CONNECTIONS
To Coaxial Out
•
See the user's manual of the external device.
Amplifier equipped with a
DolbyPro Logic Surround
Coaxial cable (not supplied)
To Coaxial Input
17