Publicité
Les langues disponibles
Les langues disponibles
QVSP Owner's Manual
PACKING CHECKLIST
Your Billy Goat is shipped from the factory in one carton, completely assembled except for the nozzle and handle.
READ all safety instructions before assembling unit.
TAKE CAUTION when removing the unit from the box.
PUT OIL IN ENGINE BEFORE STARTING
PARTS BAG & LITERATURE ASSY
Warranty card P/N- 400972, Operator's Manual P/N-831500, Declaration of Conformity P/N-831503. General Safety and
Warnings Manual P/N-100294
ASSEMBLY
NOTE: Items in ( ) can be referenced in the Parts Illustrations and Parts Lists on pages 10-13.
1. REMOVE the unit from the box. Be careful as cables could snag.
2. REMOVE the bag and attach the handle to the hood using the hardware from the parts bag. The large washer should be
on the inside and the bolt should run from the inside of the hood out. The arch of the handle should be facing to the front
of the machine and the cables shoud not be twisted around each other. NOTE: The left cable should run to the right side
of the transmission and right cable to the left of the transmission. Cable twisting will interfere with the operation of the
machine and will cause premature cable wear.
3. ATTACH the front nozzle (item 7) to the housing and secure it with the serrated hex nuts (item 58) located in the parts
bag.
Part No 831500
Boxing Parts Checklist
Screwcap 5/16"-18 x 1 3/4 qty 4
P/N-8041031
Washer 2" OD x .344 ID qty 4
P/N-810652
Washer 5/16" Flat qty 4
P/N-8171003
Nut Lock 5/16"– 18 qty 4
P/N-8160002
5
Debris Bag P/N-831225
Dust Sock P/N-831268
Front Nozzle P/N-831606
Literature Assy P/N-831019
Honda 9 HP
Honda 5.5 HP
Form No F020416A
Publicité
