Videotec UPTIRN Manuel D'instructions page 5

• This is a Class A product. In a domestic
environment this product may cause radio
interference. In this case the user may be required
to take adequate measures.
• To comply with the main supply voltage dips and
short interruption requirements, use a suitable
Uninterruptable Power Supply (UPS) to power the
unit.
• In the case of a 24Vac power supply, you must
provide for adequate separation from the AC
power supply line using double or reinforced
insulation between the main power supply line
and the secondary circuit.
4 Identification
4.1 Product description and type
designation
State of the art illuminator, which provides high
reliability and excellent image quality. The UPTIRN
lights the entire scene evenly, eliminating hotspots
and underexposures, for unbeatable night-time
images and secure surveillance of the area. The high
efficiency heat sink body ensures maximum LED
durability and protection against over-temperatures,
whereas the front glass, made of special
technopolymer, provides high infrared transmittance.
The illuminators are protected against electrostatic
discharges.
4.2 Product marking
See the label attached to the product.
MNVKUPTIRN_2222_EN
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
5.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Illuminator
• Bolts and screws
• Instruction manual
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
3