level, SOS alarm activation using the watch button, as well as
GB
losing or taking the watch off.
• Phone directory: define up to ten contacts that will be available
to the watch user in the phone directory.
• Time zone: Set your time zone to allow the watch to display
correct date and time on the screen.
• Language: Select one of the available languages of the watch.
• Settings switch: Activate or deactivate functions of the watch
• LBS localization: Activate or deactivate localization using an-
tennae of network operators
• Remotely deactivate the watch: The watch will be turned off
Questions, problems and solutions
The application does not receive commands and shows in-
formation that the watch is disconnected from the network.
Reason: The watch is disconnected from the network
Solution: – Check whether GMS signal is correct.
– Check whether SIM card is correctly installed in the watch and
whether it supports 2G Internet.
– Send an SMS from the phone to the number of the SIM card
installed in the watch of the following contents: pw,123456
,ip,52.28.132.157,8001# – the watch will respond with an SMS
of the following contents: [surl,52.28132.157,port,8001#]ok.! it
should work properly after this action.
– Check whether the parameters of the server have correct IP
number, port and ID. Check the parameters by sending an SMS
from a phone to the number of the card installed in the watch
with the following contents: pw,123456,ts# – the watch should
respond with an SMS including the IP, port and ID numbers, as
in the example:
ID: 1451498657; (ID must correspond to the number provided on
the plate included with the watch and on the bottom of the package)
9