GB
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
-
Electric heat gun
-
Restrictor
-
Surface nozzle
-
Spatula nozzle
-
Instruction Manual
Overview
1 Air inlet
A
2 On/off switch and step switch
3 mains cable
4 Blow-off pipe
5 Restrictor
6 Surface nozzle
7 Spatula nozzle
B
8 Base
Functional description
The device can be controlled with a step
switch. On level I, an air quantity of
300 l/min at 350 °C. is reached. On level
II, the device reaches an air quantity of
500 l/min at 600 °C.
Please refer to the descriptions below for
information on how the operating
elements work.
Technical specifications
Electric heat gun............ DP-EHG 2050S
Motor input power ..........................2000 W
Mains voltage .... 220 - 240 V~, 50 - 60 Hz
Safety class .........................................
Air quantity on level I .................. 300 l/min
Air quantity on level II ................. 500 l/min
Temperature on level I ....................350 °C
Temperature on level II ...................600 °C
12
Safety information
Symbols used in the
instructions
Hazard symbols with information
on prevention of personal injury
and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.
Symbols on the device
Read carefully before use.
Do not expose to rain or
moisture.
Caution! Hot surface.
Risk of burns.
Safety class II
Electrical machines do not
belong with domestic waste.
General notes on safety
This device may cause seri-
ous injury if used improperly.
To avoid personal injury and
damage to property, read
and comply with the follow-
ing safety instructions and
II
familiarise yourself with all
control elements.