Beta 1838AM Notice D'utilisation Et Instructions page 6

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
TECHNICAL DATA
MAIN LIGHT
TOP LIGHT
BATTERY SPECIFICATIONS
POWER SUPPLY VOLTAGE
CHARGE INPUT
PROTECTION DEGREE
OPERATING TEMPERATURE
USE
Before using the lamp for the first time, select the operating mode as follows:
- Press the rectangular On/Off button to enable/disable the TOP light.
- Press the wheel to enable/disable the main light.
- Rotate the wheel to adjust light intensity (see TECHNICAL DATA table for light intensity values).
- When light is enabled again, the lamp will turn on in the latest used mode.
The light arm can be rotated 180°; furthermore, the lamp is fitted with both a magnetic base to adhere to metal surfaces and a
hanging hook.
CHARGING MODE
To charge the lamp, lift the protective cover of the lateral USB-C port.
- Connect the cable first to the lamp and the power supply, and then to the mains socket, making sure that the mains voltage is
compatible with that of the charger as stated in the TECHNICAL DATA table.
While the lamp is charging, the LEDs above the USB port flash to show the charge level.
When the lamp is fully charged, all the 3 LEDs are solid on; the lamp can then be disconnected from the power supply and the
USB-C cover closed.
Charge level
- 3 LEDS on: maximum charge
- 2 LEDs on: medium charge
- 1 LED on: minimum charge
When charge is close to zero, the last LED will flash.
When the battery is completely flat, the light will turn off without any warning.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed
of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment
and human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
6
COB LED Min ~60 lm (~ 16 hours) - Max ~ 700 lm
(~ 2.5 hours)
SMD LED, 120 lm, / 10 hours
Li-ion 3.7V 2600mAh
100 - 240V ~ 50/60Hz
DC 5V -1 A (USB - C)
IP54, IK 07
-10°C ÷ 40°C
EN I