Soundmatters foxLO DASH 7 Guide D'utilisation page 5

Wireless Hands-free Calls
1. Pick Up Call: Press POWER/BLUETOOTH button.
2. End or Reject Call: Momentarily press then release the POWER/BLUETOOTH
button.
3. Transfer Call during a call: press POWER/BLUETOOTH button for 2 seconds
then release to transfer call back to phone (i.e. for privacy).
Optional Subwoofer
With DASH's subwoofer output you can easily add the Soundmatters
palm-sized foxLO, or a larger good-quality powered hi- subwoofer.
NOTE: If your subwoofer connects with an RCA, typically use the RIGHT/Red
input only (refer to sub manual), and use an RCA to 3.5mm adapter to connect
to DASH.
Auto Power O
1. Press VOL+ and VOL– together until LED ashes twice to switch between
2. LED ashes green to indicate Auto Power O is enabled
NOTE: Auto Power O is available ONLY when battery-powered in Bluetooth
mode. Auto Power O engages when Bluetooth is idle more than 5 minutes. It
does NOT work in wired audio mode with the 3.5 mm phone jack plugged in.
Clear Bluetooth Memory
1. DASH can store up to 8 devices as paired in its memory. After that you need to
2. While connected to the external power adapter, press VOL+, VOL– and
NOTE: We suggest you use one hand to press the VOL+ and VOL– rst, then with
the other hand press the Power button to avoid shutting o power accidentally.
ENGLISH
(to prevent battery drain)
enabled and disabled.
and ashes red to indicate it is disabled.
(after 8 devices):
clear the memory to pair new devices.
Bluetooth/Power buttons simultaneously for >1 second.
5