Soundmatters foxLO DASH 7 Guide D'utilisation page 3

Volume Up – press
A
Volume Down – press
B
LED Charge/Bluetooth Indicator – see "Operation Mode – LED Color"
C
Power On/O , Bluetooth Control – power on press and hold for 3 seconds,
D
power o for 5 seconds
BassBattery – behind grille
E
Microphone
F
Reset – insert the end of a small paper clip (or similar)
G
Audio Input – 3.5mm stereo mini-jack
H
Subwoofer Output – 3.5mm stereo mini-jack to foxLO or other powered
I
subwoofer
5V Power In – the high-power wall charger with micro-round connector
J
provides fastest charging. Connected in this manner, the audio output
wattage is twice that of using battery power alone.
micro-USB Power In – the universal standard for charging
K
ENGLISH
Getting Started
1. IMPORTANT: Use the wall charger with the "high-power" micro-round
connector (not the micro USB) cable to fully charge the foxL before using
battery operation the rst time.
2. See Bluetooth Operation below for rst-time "pairing" instructions.
Getting the Most
1. IMPORTANT: Turn power OFF when not listening to avoid battery drain.
(Or in battery-operated Bluetooth mode set to Auto O . See below.)
2. Placing foxL DASH on or near a solid surface will increase bass and
overall output.
3. Plays less loud during the last 10% of its battery charge.
4. Get the latest information on "Getting the Most" by visiting
soundmatters.com/faq.
3