PROLUMIA ROCKDISC II Manuel D'utilisation page 5

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. The product must be installed by qualified technicians. The power supply must be cut before installation.
2. The installation wiring must be 3x 1.0 mm² at least and wired in accordance with the latest IEE electrical regulations or the national
requirements.
3. Do not touch the electronic circuit and its components.
4. Do not touch the LEDs while installing or maintaining.
5. This product contains a light source of energy efficiency class D.
TECHNICAL DATA
Supply voltage: AC 220-240V 50/60Hz
Light source: LED SMD2835
Operating temperature: -20°C – +50°C
Rockdisc II Mini
TECHNICAL INFORMATION
Article no. Voltage
40009021 220-240V 50/60Hz SMD2835
40009241 220-240V 50/60Hz SMD2835
PHOTOCELL - DESCRIPTION
• Automatically turn on lights at dusk and off at dawn.
• Adjustable switching on/off ambient light level.
1
OFF
Daytime
PHOTOCELL - PARAMETER SETTINGS
Rockdisc II
LED type Power Max. light output
9.5W 750Lm
14W 1200Lm
2
ON
Dusk
www.prolumia.com
Photocell
Yes
Yes
3
ON
Dusk - Night
By selecting the combination of the DIP
switches, switching on/off lux level can be
set as required.
When ambient light level drops below the
'on' lux level, sensor automatically switches
on lights. When ambient light level exceeds
the 'off' lux level, it switches off lights.
4
OFF
Dawn
5