NightStick NSR-9600 Manuel D'instructions

Instruction Manual
NSR-9600
THANK YOU FOR SELECTING THE NIGHTSTICK NSR-9600!
PLEASE SAVE THESE INSTRUCTIONS
Please read these instructions before using your 9600. They include
important safety and operation information. Be sure to charge the 9600 fully
before the fi rst use. A battery is fully charged when the charger light is green.
Included in the box - Compris dans la boîte - Incluido en la caja
WARNINGS
Lithium-ion batteries must be used and charged properly. Improper use
can result in serious injury, fi re, or death.
NOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this product
in explosive atmospheres, near fl ammable liquids, or where explosion proof
or intrinsically safe lighting is required.
DO NOT use this product in the proximity of vehicles or equipment when
there is a risk of fl ammable liquids coming into contact with the fl ashlight.
Light can become hot while on. To prevent damage DO NOT cover or
place next to any potentially fl ammable materials while in use.
Do not leave the battery in direct sunlight or use or store the battery inside
cars in hot weather.
Do not expose the battery to water or salt water, or allow the battery to
get wet.
Do not store the battery with metallic objects that may cause a short circuit.
Immediately discontinue use of the battery if the battery emits an unusual
smell, feels hot, changes color, changes shape or appears abnormal in any
way.
Keep out of the reach of children.
Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.mynightstick.com
INITIAL USE
Fully charge the 9600 before the fi rst use, or if the battery is new or has
been unused for several months. The maximum charge time required is
approximately 4 hours.
DAILY USE
Use only the supplied Nightstick charger, battery and AC or DC adapter.
For best performance, charge the 9600 when the fl ashlight beam starts to
dim.
Connect the AC power adapter to the charger. The LED indicator will not
be illuminated at this point.
With the fl ashlight facing forward, slide the 9600 into the charger until the
contacts snap into place.
The LED indicator changes to constant red indicating the 9600 is properly
inserted into the charger and is in fact charging. The LED indicator remains
red until the battery is fully charged. At full charge, the LED indicator turns
green.
The total time to full charge the 9600 varies depending on the remaining
charge in the battery pack.
To confi rm a full charge, keep the 9600 in the charger and turn it on.
The LED indicator will change to red. Turn off the 9600. If the 9600 is fully
charged, the LED indicator will turn green. If not, it remains red until the
charge is completed and the LED indicator turns green. The 9600 will now
be fully charged.
OPERATION
The 9600 fl ashlights have fi ve light modes: momentary, full brightness,
medium brightness, low brightness and strobe. The 9612 model has a single
body switch and the 9614 has a body switch and a tail switch that operate in
tandem.
MOMENTARY FLASHLIGHT MODE
Lightly press the switch for momentary operation. Release the switch to
turn the light off.
CONSTANT-ON
Press the switch until it clicks and then release for constant-on in high-
brightness mode. Press and release the switch to turn the light off.
SELECT BRIGHTNESS LEVEL
Press and hold down the switch. The light will cycle from high to medium
to low and then back up again at a rate of approximately one mode per
second. The light will continue to cycle up and down through the various
modes as long as the switch is held down. When the desired brightness
level is reached, simply release the switch, and the light will remain in that
brightness mode. Press and release the switch to turn the light off.
STROBE FUNCTION
From off or any mode, rapidly double click the switch to activate the strobe
function running at full brightness. Press and release the switch to turn the
light off.
BAYCO PRODUCTS LIMITED LIFETIME WARRANTY
WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in
workmanship and materials for the original purchaser's lifetime. The Limited
Lifetime Warranty includes the LEDs, housing and lenses. Rechargeable
batteries, chargers, switches, electronics and included accessories are
warranted for a period of two years with proof of purchase. Disposable, non-
rechargeable batteries are excluded from this warranty. Normal wear and
failures which are caused by accidents, misuse, abuse, faulty installation and
lightning damage are also excluded.
In the event that Bayco Products, Inc. receives notice that any product
does not conform to its warranty, the original purchaser's sole and exclusive
remedy, and Bayco Products, Inc.'s sole and exclusive liability, shall be
for Bayco Products, Inc., at its sole option, to either repair or replace the
non-conforming product in accordance with this limited warranty.
original purchaser shall follow the instructions below to qualify for a repair
or replacement product. This is the only warranty, expressed or implied,
including any warranty of merchantability or fi tness for a particular purpose.
IN NO EVENT WILL BAYCO PRODUCTS, INC. OR ITS AFFILIATES
OR SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL
INS-9600-15
The