PNJ FeiyuTech Vimble 2 Manuel D'utilisation page 16

EN
Motion control speed reference table:
12 18
seconds seconds
/ turn / turn
2.Enter motion control mode by
clicking the function button 4 times
4.Set rotation end position
Tilting
Exit operations:
1.Gimbal automatically exits motion control mode once move completes.
2.Click the function button to exit the motion control mode during automatic rotation and reset the gimbal.
3.Enter the motion control mode or motion control setting, double click the trigger button to exit the motion
control mode and reset the gimbal.
Gimbal Initialization
Initialize gimbal when:
(1) Smartphone fails to remain level.
(3) Gimbal is used in extreme temperature variations.
Click the function button five times.
The motors will stop working. Status
indicator turns solid blue.
Note: if the initialization is not successful, click the function button to wake up. restart initialization process.
24 30 1
seconds seconds minute
/ turn / turn / turn
Panning
Record the second position
(rotation end position) by
manually moving smartphone
to desired position. Hold in
position for half a second. Click
the function button to record
rotation end position.
Place the gimbal on a flat, horizontal surface.
The gimbal will automatically initialize after a few
seconds detecting no movement. The blue light will
flash three times to indicate end of initialization.
Vimble 2 Rotation speed
2 4 8
minutes minutes minutes
/ turn / turn / turn
3.Set rotation start position
Record the first position (rotation start position)
by manually moving smartphone to desired
position. Hold in position for half a second.
Click the function button to record rotation
start position.
5.The gimbal is motion control from rotation start position
to rotation end position
(2) Gimbal has no been used for a long period of time.
6
15 30 1
minutes minutes hour
/ turn / turn /turn
(default)
Tilting
Panning
Gimbal will automatically move
back to rotation start position
and start moving to rotation end
position at a constant speedas
determined by user in the Vicool
App.
After the initialization is successful,
click the function button to wake up.
4 8
hours hours
/ turn / turn