Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Tip：
The maximum load
supported depends
on the positioning
of the smartphone
on the holder.
5. Power on / off
Make sure the smartphone is secure before powering on the gimbal.
When battery is low, the status indicator will blink red three times every
5 seconds. Please charge gimbal .
Power on: press and hold the function button until the status indicator turns
green and gimbal beeps.
Power off: press and hold the function button until the status indicator changes
from a flashing red to a solid red light and gimbal beeps.
Functions modes
Operation method
Status Indicator Explanation
The current mode of the gimbal can be dentified by the indicator status.
Indicator status
Blue light flashes once
Blue light flashes twice
Constant Blue light
Blue light keeps flashing
Red light flashes three times
Red light keeps flashing
Bluetooth shutter release button
By connecting bluetooth or Vicool App,
you can operation as follow
Button
Single click
Press & Hold
Troubleshooting: if the gimbal fails to connect to the Vicool App, power off the gimbal. Press and hold both the bluetooth
shutter release button and the function button to reset the bluetooth connection.
Load weight:
100~200g
Mode / Status
Pan mode
Follow mode
Lock mode / gimbal initializing
/ motion control mode
Initialization failure/
malfunction
Low power
Gimbal powering off
Mode / Indicator status
Photo / Status indicator flashes
green once
Video / Status indicator remains
solid green during recording
Status indicator
Function button
Bluetooth shutter
release button
Explanation of joystick control
Left
4
Load weight:
≤130g
Joystick
Up
Right
Down
Publicité
Table des Matières
