General; The Ar60 At A Glance; Fig. 1: Construction Of The Ar60 Laser Alignment Aid - SICK AR60 Notice D'instructions

en
Chapter 1
1

General

Fig. 1: Construction of the
AR60 laser alignment aid
16
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
General
The AR60 laser alignment aid is a device for aligning various SICK
optical sensors, such as for example photoelectric switches and light
curtains.
1.1

The AR60 at a Glance

• Compact housing.
• Battery power supply – no need for mains power
• Surface to which various adapters can be screwed.
• Easy-to-handle laser pointer.
Micro-
battery
2 x 1.5 V
On/Off switch
Using the AR60 laser alignment aid, optical sensors (sender/receiver)
may be quickly and easily aligned during installation, even before
power is supplied to the sensors.
The AR60 laser alignment aid is of great advantage when the beam
array is deflected by means of deflector mirrors. The alignment
(adjustment) of sender/receiver and deflector mirrors can thus be
carried out very rapidly by one person.
1)
Batteries are to be disposed of separately in accordance with statutory regulations.
Operating Instructions
1)
Connection screw
Spirit level
Light emission
approx. 6 mm
Remove cover to
change battery
8007406/YW24/2016-05-13
AR60
.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
P ≤ 1 mW (cw), λ = 630-680 nm
Complies with IEC/EN 60825-1:2007,
21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice
No. 50, dated June 24, 2007
Subject to change without notice