Kobalt KST 2580-06 Mode D'emploi page 14

ASSEMBLY INSTRUCTIONS
6. To replace the bump knob
a. Remove the battery pack.
b. Turn the string trimmer over to access the spool.
c. Remove the spool cover (L) by pressing on the two
tabs parallel to each other on the sides of the
spool cover (L).
d. Remove the spool (M) from the spool
housing (O).
e. While holding the bump knob , firmly pull it out.
f. Replace with a new bump knob .
Reinstall the spool and spool housing.
7. Using the strap harness
a. Rotate the strap harness to the upward position.
b. Hook the strap (not included) to the strap
connection.
6a
6b
7
Strap
Connection
14
Tab
M
O
L
L
M