ortoalresa Digicen 21 Serie Manuel De L'utilisateur page 25

Along centrifugation:
Mensaje
Emergency Stop
Unbalance
Emergency stop
Lid Open
Emergency stop:
Acceleration time exceeds
and not reaches set RPM.
Emergency stop:
Unstable speed
Emergency stop:
Speed sensor failure
Emergency stop:
Cool system failure
Descripción
Max vibration level has been
exceeding. Please, you must
compensate the samples on rotor.
The lid opened when the centrifuge is
working. PRUDENCE. An accident
should happen. Please wait for the
complete stop
Then motor can not get speed program
after the max. acceleration time
The motor gets centrifugation speed,
but it not able to keep speeds servo-
control stable.
It has detected a failure on encoder or
speed detector.
The cooling system has failed
MANUEL DE L´UTILISATEUR
Actuación
It will make an emergency stop. Once
when the device will stop, press some key.
It will make an emergency stop. When rotor
stops, please press some key.
It will make an emergency stop. When rotor
stops, please press some key. Then will
appear after sales call. Please press some
key.
It will make an emergency stop. When rotor
stops, please press some key. Then will
appear after sales call
It will make an emergency stop. When rotor
stops, please press some key. Then will
appear after sales call. Please press some
key
It does not allow the start, and stop the
engine. Then will appear general message:
please contact after sales service
25