KENMORE ELITE KKEB1.3HSS Guide D'utilisation Et D'entretien page 5

BLENDER TIPS AND TECHNIQUES
• For quicker, easier blending, cut food into 2-in. long pieces before adding to blender jar. To chop
or grate either fresh or frozen fruit, cut fruit into pieces about 3/4 -inch long.
• To best circulate foods or fruit that are to be blended with liquid, pour the liquid into the jar rst,
then add the solid foods or fruit.
• The following tasks cannot be performed e ciently with a blender: beating egg whites,
whipping cream, mashing potatoes, grinding meats, mixing dough, and extracting juices from
fruit and vegetables.
• The following items should never be placed in the blender jar, as they can cause damage: bones,
large pieces of solid frozen foods, or dense, tough foods such as turnips.
CRUSHING ICE
• To crush ice, ALWAYS have liquid in the jar. Start out with 2 cups of liquid, and add about 2 cups
of ice cubes. Hold one hand rmly on the lid. Push the Ice Crush button.
• If more ice is needed, remove the measuring cup in the middle of the lid and add cubes one at a
time through the hole in the lid. DO NOT CRUSH ICE WITHOUT LIQUID.
CAUTION
Failure to follow all of the above directions can result in damage
to the blades, jar, blender motor, and possibly result in personal injury.
CARE AND CLEANING
1. Before cleaning, unplug the blender.
2. Rinse parts (jar with xed blade assembly, jar lid and measuring cup, and single serving cup
blade assembly) immediately after blending for easier clean up.
3. All removable parts can be washed by hand or in a dishwasher. The jar lid and measuring cup,
and single serve lid and blade assembly should be placed in the top rack only. Disassemble all
parts from each other before placing in the dishwasher. The jar with xed blade assembly and
single serve cup are bottom rack dishwasher-safe. Do not place the jar or any other parts in
boiling liquids.
CAUTION - The blender blades are sharp.
Be very careful when washing them by hand to avoid being cut.
4. The motor base is designed to be resistant to liquids. If liquids spill into the motor base:
• Unplug the motor base.
• Wipe with a damp cloth and dry thoroughly.
• NEVER immerse the motor base in water.
5. Do not use abrasive scouring pads or cleaners on motor base as nish may become scratched
or damaged.
8
NOTES
9