Safety Information; Installation And Electric Connections; Appliance Functions - MACAP M2 Serie Instructions Originales

4

SAFETY INFORMATION

This appliance has been designed exclusively for grinding coffee beans, consequently the manufacturer will not be held liable
for any damage or incidents that are caused if it is used for any other purpose.
The warranty will be automatically invalidated in the event the appliance is used improperly.
Only qualified operators must install the appliance or carry out any technical maintenance work.
The appliance is not waterproof and must be kept well clear of any potential water sprays or very damp areas.
The appliance has been designed for professional and not home use, and therefore must only be used by trained personnel.
The appliance must not be used by children, or by adults with reduced physical, mental or motor capacities, nor by anyone
without sufficient experience or knowledge, unless they receive specific training or use the appliance under the supervision
of a trained person.
keep the appliance out of the reach of children. Children being supervised not to play with the appliance.
The appliance has a thermal circuit breaker for the motor, when it triggers and stops the grinder, unplug the appliance at the
mains and wait at least one hour before turning it back on again.
If the power cable is damaged it must be replaced by the manufacturer or by the technical assistance service, or at any rate
by a person with similar qualifications, so as to prevent all risks.
UNPLUG THE APPLIANCE AT THE MAINS BEFORE CARRYING OUT ANY MAINTENANCE OR CLEANING WORk.
5 INSTALLATION AND ELECTRICAL CONNECTIONS
Installation must be carried out by trained technical personnel.
Installation must be carried out in strict compliance with the safety provisions
currently in force in the country of use, with particular reference to the accident
and fire prevention regulations and electricity authority regulations.
Place the appliance on a flat surface to ensure it is perfectly stable. Before
connecting the appliance to the mains, make sure the switch is off (see figure
F1) and that the voltage and frequency data given on the data plate are
commensurate with that of the mains supply.
The power cable must be connected to the ground plate, which must be
perfectly efficient and in compliance with current safety regulations.
6

APPLIANCE FUNCTIONS

Place the coffee hopper firmly on the upper container and then pour in the coffee beans.
Put the lid on the coffee hopper and open the fan, to allow the coffee beans to flow into the grinder.
Do not turn the appliance on without the coffee hopper or without its lid.
Turn on the main switch (see figure F1).
6-1 GRINDING ADjUSTMENT
The appliance grinding is set in the factory at a coarseness that is suitable for
many types of coffee that are on sale.
To adjust the grinding, press the fixing pin and turn the grinder in one
direction or the other until you find the right setting, release the pin to block
the nut. Ensure it is firmly blocked each time the appliance is turned.
F1
F2
9
ENGLISH