Buffalo GF539 Manuel D'instructions page 15

Telephone Helpline: 0845 146 2887 (United kingdom)
Trouble Shooting
Fault Probable Cause
Does not heat No power
Switch set to OFF
Thermal Protector Switch has
activated
Thermostat set to low
Mixing paddle does No power
not turn
Mixing rod not fitted correctly
Motor Fault
Switch set to OFF
Tap leaks Tap not fitted correctly
Build up of debris
Sealing Gasket needs replacing
Water escaping Temperature too high
from boiler
Tank filled above MAX indication line
Sealing gasket needs replacing
Fault Probable Cause
Product leaks from The bowl is not fitted correctly
bottom of bowl
Sealing gasket needs replacing
Machine shuts The water level in the boiler tank has
down while in use fallen below the minimum level
No water in boiler tank
If the machine malfunctions due to causes other than those listed or the proposed corrective
actions do not solve the problem please call a Buffalo agent or qualified technician
Technical Specification
Model Voltage Power
GF539 230v 50hz 1Kw
CN219 230v 50hz 1Kw
Capacity
Current
(Litres)
4.6A 9
4.6A 5
Action
Make sure the machine is plugged
in correctly
Set the switch to ON
Reset Thermal Protector Switch
Adjust the thermostat
Make sure the machine is plugged
in correctly
Ensure mixing rod is correctly fitted
Call Buffalo agent or qualified
technician
Set the switch to ON
Empty machine and fit tap as per
instructions
Empty machine and clean tap as per
instructions
Call Buffalo agent or qualified
technician
Adjust the thermostat
Allow machine to cool then empty
the tank and refill to correct level
Call Buffalo agent or qualified
technician
Action
Empty machine and re-fit bowl as
per instructions
Call Buffalo agent or qualified
technician
Fill the boiler tank to max fill level
and reset Thermal Protector Switch
Fill the boiler tank to max fill level
and reset Thermal Protector Switch
Dimensions
h x w x d mm
580 x 410 x 280
465 x 410 x 280
Weight
(kg)
7.5
7.3